|
Bonding Silicone bearing calculationFor 4 sided glass bonding
Disclaimer; this is a tool for preliminary information used for calculating silicone capacity. This can not be used for construction and official purposes. A licensed static engineer report must be obtained for official use. FMT is not responsible for any outcomes from this tool used for constructions. |
|
TR |
||||
Bonding Silicone bearing calculation |
||
Width of the silicone fill : | mm | |
* The height of the silicone must be between 6 - 15 mm |
||
Width of glazing unit : | mm | |
Height of the glazing unit : | mm | |
Bonding Area: | m2 | |
Design load to bear: | kg/m2 | |
Total load : | kg | |
Unit force applied : { X } | kgf/m2 | |
The tensile strength of silicone to be used : { Q } | kgf/m2 | |
Result : |
Disclaimer; this is a tool for preliminary information used for calculating silicone capacity. This can not be used for construction and official purposes. A licensed static engineer report must be obtained for official use. FMT is not responsible for any outcomes from this tool used for constructions.
Certificates I Corporate Values and Ethics
Social Responsibility I Human Resources
+90 (212) 709 2893 I +90 (212) 236 6828
® FMT ENGINEERING, CONSULTANCY SERVICES
and FOREIGN TRADE Co. Inc.